Water-Based Laminating Adhesive-Special Adhesive For Gold And Silver Cards

Performance characteristics:

This product is polymerized using international advanced synthesis technology, with excellent leveling performance, high brightness, high peel strength, fast speed, long-term continuous lamination without foam. Suitable for imported and domestic fully automatic dry laminating machines, ordinary bridge-type dry laminating machines and oily adhesive laminating machines. The laminating with this glue has high brightness without stripes, strong adhesion, and no lines on embossed die-cutting.

Technical indicators:

Use process and precautions:

1. The laminating method is dry laminating, that is, the laminating machine should use a dry laminating machine with a drying tunnel and a laminating roller that can be heated.

2. The drying tunnel temperature is about 60-95℃. The temperature of the composite pressure roller is about 40-70℃, and the composite pressure is about 8-20 kg.

3. It is recommended that the glue be dried to 70-90% dry under permitted conditions. Under such conditions, the composite finished product has higher brightness and faster speed. Under such composite conditions, the temperature of the composite pressure roller should be reduced to below 50℃ to prevent large bubbles from appearing in the composite product; the pressure should be slightly reduced so that the glue is not squeezed out.

4. For gold and silver printing products or inks that are easy to change color and gold and silver cardboard, the glue must be completely dried.

5. When using the process of completely drying the glue, the temperature of the composite pressure roller should be as high as possible without scalding the film, and the greater the pressure, the better.